 |
Hantek DSO1062B Handheld Oscilloscope |
IF you buy HANTEK DSO 1202b Oscilloscope you get the bag, The bag is good it has two pockets on the front. The screen is not very HD resolution but it is very good for the equipment, it gets the job done very well. It has stand so you can stand it
Hantek DSO1062B Handheld Oscilloscope, 2 Channels 60MHZ 1GSa/s Sample Rate 1M Memory Depth 6000 Counts DMM with Analog Bargraph white
Connect the oscilloscope
Set the switch on the probe to 1X and connect the probe to Channel 1 on the oscilloscope.First,align the slot in the probe connector with the protuberanceon the CH1 BNC and push to connect; then,turn to right to lock the probe in place; after that, connect the probe tip and reference lead to the PROBE COMP connectors. TheProbe COMP:~2V@1KHz
Description
1. LCD Display2. F1~F5: Sets or switch options for the menu
3. DirectionKeys
4. HORI: Shows Horizontal menu
5. TRIG: Shows Trigger menu
6. LEVEL: Adjust the trigger level
7. RUN/STOP: key for running or stopping the operation
8. AUTO: Be used for auto setting under the oscilloscope operation mode
9. TIME/DIV: Decrease or Increase the time base
10. POSITION: Adjust the horizontal trigger position
11. CH2: Shows the CH2 menu
12. VOLTS: Decrease or Increase the voltage/div
13. CH1: Shows the CH1 menu
14. M/R: Showsthe Math or REF menu
15. DMM Buttons: The DMM control buttons
16. DMM/SCOPE: Switch DMM or Scope function
17. MENU ON/OFF: Turn on/off the menu
18. SAVE RECALL: Shows SAVE or RECALL menu
19. MEAS: Shows Measurement menu
20. UTILITY: Shows Utility menu
21.CURSOR: Shows Cursor menu
